Nocturnal

SLEEPLESS NIGHTS NEVER ENDS

NOCTURNAL

Looking for an ambient and textures creation box?
As huge fans of cinematic atmospheric soundtracks and ambiences we wanted to develop a pedal made for soundscapes creation.
It's composed of a Shimmer Reverb, a Dynamic Tremolo and a Modulated Delay.
Each effect can be used together or separately and has its own momentary or trails function.

Pass from the Dusk, through the Night to the Dawn with the Nocturnal.

Completely built in France. From the enclosure to the circuit. Assembled by hand in our workshop.

The Nocturnal has a lifetime warranty. Of course.

3 EFFECTS, ONE PEDAL

  • DUSK

    Modulated Delay

    Warmed and inspirational delay based on a tape delay circuit.

    Settings :

    Mix : Controls the mix between Full Dry or 50% Dry / 50% Wet

    Time : Time between each repetition. From a few ms to 1 second. Signal quality turns to Lo-Fi when it’s pushed to long repeats.

    Feedback : Number of repetitions. Able to self oscillate very easily when the knob is around 7.5.

    Modulation : Amount of modulation in the delay repetitions. Create a sort of old tape effect

    Speed : Modulation’s frequency from 0.1 to 20 Hz.

    Momentary effect : Feedback self oscillation when footswitch is long pushed

  • NIGHT

    Dynamic Tremolo

    Turn a huge amount of shimmer and reverb into it to make it oscillate faster.

    Settings :

    Sensibilty : Sensibility, turn it clockwise to make the tremolo more sensitive to your attack

    Depth : Controls the tremolo’s volume

    Momentary effect : Tremolo overspeed when footswitch is long pushed

  • DAWN

    Shimmer

    Create bright soundscapes and loose the notion of time until the sunrise. 

    Settings :

    Blend : Controls the amount of Dry/Wet signal. You can have a full Wet reverb.

    Reverb : Reverberation time. Max 15 sec.

    Shimmer : Makes the reverb shimmer

    Filter : Digital filter. Low pass. Lets you make the shimmer darker or more shiny

    Colour : Notch active and analog filter around 2.2 kHz. Controls the Q of the filter.

    Trails : when footswitch is long pushed, the trails are activated and it allows you to play with the dry signal with the shimmer trails

Specs

 
  • Maximum current draw

400 mA

  • Imput Impedance

1 MOhm

  • Size

186 x 119 x 56mm

  • The use of an isolated power supply is recommended for powering all Collision devices Pedals.

  • Power supply not included.

  • The pedal is buffered bypass

User Manual

  • Voltage

+9V DC (negative center)

  • Output Impedance

    10 KOhm

  • Weight

    250gr